Welcome to POV One™

Let's get you set up.

Six steps. About 10 minutes from charged to first photo.

6 Steps ~10 Min No Tools Needed
First, check the box

Everything you'll need.

Confirm everything's here. Missing something? Contact us.

×1
POV One™ Smart Sunglasses
×1 set
Photochromic lens set
×1 set
Sunglass lens set
×1
Magnetic charging cable
×2
Rubber anti-slip nose holders
×1
Microfiber cleaning pouch
×1
Quick-start guide
Setup Steps

Six steps. Ten minutes.

Follow them in order.

Recommended First

Charge before you begin.

Your POV One ships with a partial charge. For best results, charge it fully (about 60 minutes) before starting setup.

  1. Connect the magnetic cable to the right temple.
  2. Plug into a 5V / 1A USB adapter.
  3. Wait until the LED turns from red to blue.
No fast chargers. Quick Charge or Power Delivery bricks can damage the battery. Any standard phone charger works.
01

Power on.

Press and hold the front physical button (right temple, closer to the lens) for 2 seconds.

Voice prompt confirms power. LED blinks blue = searching for phone.

To power off later: Press and hold the same button for 5 seconds.
02

Download the HeyCyan app.

Free. iOS 13+ or Android 8.0+.

HeyCyan in Google Play Store
HeyCyan in Google Play
Download on theApp Store Get it onGoogle Play
Get the right one. The publisher is "Glasses Dev" (Android) or "Shenzhen Qingcheng Future Technology" (iOS). A different app called "Cyan Glasses" is not the same.
03

Open the app.

No account needed — just two taps.

HeyCyan welcome — accept terms and tap Next
Accept terms, then tap Next
  1. Check the box at the bottom to accept the User Agreement & Privacy Policy.
  2. Tap Next in the top right.
04

Pair with your glasses.

The app will guide you. Your glasses must be powered on with the LED blinking blue.

1
In your phone's Bluetooth settings, find "POV One GS4 Max_xxxx" under Available devices and tap it.
Find POV One GS4 Max in Bluetooth Available devices
2
Tap Pair on the Bluetooth pairing request.
Bluetooth pairing request — tap Pair
3
Return to the HeyCyan app and tap Connecting devices.
HeyCyan — tap Connecting devices
4
When prompted, allow HeyCyan to access your device's location. Tap While using the app or Only this time.
Allow HeyCyan location permission
5
Confirm the blue LED on your glasses is flashing, allow the Nearby Devices permission if prompted, then tap Next.
Prepare your device for pairing — tap Next
6
Tap your glasses on the discovery screen, then tap Connect.
Device discovery — tap Connect
Android users: Location Services must be on. Android requires it for Bluetooth discovery — your location isn't actually used.
Firmware update prompt. Right after pairing, HeyCyan may prompt you to install a firmware update. Keep your glasses close to your phone, tap Update, and let it finish before continuing. Updates take 2–5 minutes.
My glasses don't show up in the list.
Check the LED is blinking blue (not solid). Solid blue means already paired with another device — turn that device's Bluetooth off and retry. Otherwise: forget the "POV One GS4 Max" entry in Bluetooth settings, restart the glasses and app, then retry.
05

Take the in-app tour.

HeyCyan includes a 10-step walkthrough of every button and touchpad gesture. Wear your glasses and follow along.

Explore HeyCyan tour intro
Explore HeyCyan
Tour step 1 — Take Photo
Step 1 of 10 — Take Photo

The tour covers: take photo, record video, sound recording, AI assistant, image recognition, and touchpad gestures (volume, play/pause, skip).

Worth doing once. It only takes a couple of minutes and you'll know exactly what every gesture does.
06

Take your first photo.

You're done with setup. Capture the moment.

HeyCyan connected — Quick Function
Connected — Quick Function

Three ways:

  • Click the front physical button once on your glasses, or
  • Say "Hey Cyan, take a photo," or
  • Tap Take photo in the HeyCyan Quick Function area.

The white front LED blinks once = captured. To view, tap the Album tab in HeyCyan.

You're ready. Photos, video, calls, music, AI, translation — all hands-free.
Recommended

Optimize your setup.

Three quick settings for the best experience.

1
On the HeyCyan Home tab, tap the device block at the top to open My glasses.
HeyCyan connected home — tap top device block
2
Turn on Wearing detection so your glasses pause when you take them off. Then tap Recording Settings.
My glasses — enable Wearing detection, tap Recording Settings
3
Set Video duration to 12 min (the maximum single clip). Adjust the other settings to your preference.
Recording Settings — set Video duration to 12 min
Quick Reference

Know what your glasses are telling you.

What each LED and button does.

LED Indicators

Blinking bluePowered on, searching for phone
Solid blueConnected to phone, or fully charged
Solid redCharging in progress
Blinking redPowering off
Front LED — blink oncePhoto just captured
Front LED — solid onCurrently recording video

Buttons & Controls

Front Physical Button (Right Temple, Front)
Hold 2 sec to power on; hold 5 sec to power off. Single-click to take a photo. Double-click for video. Long-press for sound recording. During a call: short-press to answer or hang up, long-press to reject. Short-press 5 times to factory reset.
Rear Physical Button (Right Temple, Rear)
Single-press to wake the "Hey Cyan" AI assistant. Double-press for instant scene recognition ("what's in front of me?").
Right Touchpad (Outer Right Temple)
Swipe forward/back for volume. Double-tap to play/pause music. Triple-tap to skip a track. Long-press for next song.
Camera
Front-facing on the right side of the frame, near the lens.
Charging Interface
Magnetic connector on the right temple. Use the included cable with a 5V / 1A USB adapter.
Status LED
Indicates power, charging, and connection state. See the LED reference (left).

Need a hand?

Stuck on a step or seeing something unexpected? Our team responds within 1–2 business days.

Contact our team → Browse full Support